Finish Logic runs five named metal finishing service lines out of one shop in Concord, California. Whether you need a batch of commercial brackets coated, a set of wheels refinished, or a patio set restored, the right starting point is knowing which service line fits the job.
TL;DR
Finish Logic offers five metal finishing service lines from one Concord shop. Each is built for a different job type:
Residential Powder Coating: Railings, fences, and gates for homeowners and contractors in the Concord area.
Commercial Powder Coating: Batch orders and fabricated parts for Bay Area manufacturers and fabricators.
Wheel Coating: Automotive wheels refinished at the Concord shop; bring bare wheels, wheels with tires still on, or drop off the whole car.
Outdoor Furniture Restoration: Powder coating plus cushion and sling replacement; pickup and delivery up to 150 miles.
Cerakote: Thin-film ceramic coating for precision parts where tight tolerances and fine detail matter.
Use the menu below to find your service line, then call 925-788-2911 to request a quote.
What Metal Finishing Services Does Finish Logic Offer in the Bay Area?
Finish Logic operates out of Concord, in the heart of Contra Costa County, and serves commercial and residential customers across the nearby Bay Area. Each service line below is organized by job type rather than coating chemistry, so you can find the right fit before calling for a quote. The table lists the five service lines, plus the powder coating process guide that explains the core process behind most of them.
| Service Line | Best For | Service Area |
|---|---|---|
| Powder Coating: What It Is and How It Works | Process guide rather than a service line: start here if you want to understand how powder coating works before choosing a line | Concord shop; customers within roughly 60 miles typically drive in |
| Residential Powder Coating for Railings, Fences and Gates | Homeowners and contractors needing railings, fences, gates, and decorative metalwork refinished | Concord and surrounding Contra Costa communities |
| Commercial Powder Coating | Manufacturers, fabricators, and facility managers with recurring batch orders or larger commercial parts | Concord industrial corridor and nearby commercial markets including Martinez, Pacheco, and Pleasant Hill |
| Wheel Coating | Automotive wheels and rims; bring bare wheels, wheels with tires still on, or drop off the whole car | Customers bring wheels or drop off the vehicle at the Concord shop; no mobile service |
| Outdoor Furniture Restoration | Patio furniture restoration including powder coating, cushion replacement, and Sunbrella fabric; brands such as Brown Jordan, Tropitone, and Mallin restored | Pickup and delivery up to 150 miles from Concord |
| Cerakote | Precision or thin-profile parts where a thin-film ceramic coating is required for detail retention | Customers bring parts to the Concord shop |
Why One Shop Matters for Bay Area Buyers
Most local metal finishing shops specialize in one process or one customer type. We run all five service lines from the same Concord location. That means a fabricator sourcing both commercial bracket coating and wheel refinishing for a company fleet does not need to manage two vendors or two pickup schedules. It also means we can route a job to the right process rather than defaulting to whatever coating happens to run most often.
The Powder Coating Institute describes powder coating as an electrostatically applied dry powder cured under heat, producing a finish that is harder, more durable, and more environmentally sound than most liquid paint alternatives. Finish Logic applies that process across residential, commercial, furniture, and wheel applications, with Cerakote reserved for jobs where the thinner film and different chemistry are a better fit for the part.
How Do You Know Whether Your Project Needs Powder Coating, Cerakote, or a Wheel-Specific Coating?
This is the question most first-time customers get stuck on. The short answer: powder coating and Cerakote are distinct processes with different chemistries, different film thicknesses, and different best-fit applications. They are not interchangeable, and choosing the wrong one for a part does not just affect appearance; it affects how the finish performs over time.
Powder Coating vs. Cerakote: The Practical Difference
Powder coating is a thermoset or thermoplastic polymer powder, electrostatically applied and oven-cured into a thick, impact-resistant shell, roughly 3 to 5 mils (75 to 125 microns) in a single pass. Cerakote is a thin-film ceramic-based liquid coating that goes on at roughly 0.5 to 1.0 mil (12 to 25 microns), which makes it the better fit for precision parts where a thicker film would alter fit or obscure fine detail.
According to NIC Industries’ official Cerakote training manual, the thin film is designed for applications with tight tolerance requirements. A thicker coating in those situations would disrupt mechanical function or alter part dimensions. Coating a railing or a batch of commercial brackets is a different job entirely. For those parts, powder coating’s thicker, more impact-resistant film is the better fit.
For the full comparison, see Cerakote vs. Powder Coating.
When Wheel Coating Is Its Own Category
Wheel jobs at Finish Logic are handled through the Wheel Coating service line rather than routed through general commercial powder coating. That is not just a labeling choice. Wheel work has its own intake: customers bring bare wheels, bring wheels with tires still on, or drop off the whole car, with indoor storage during the job. The workflow is built specifically around automotive parts, not general fabrication. The service category reflects the application and handling requirements. The coating method may still be powder coating, but the workflow is different from a batch of commercial brackets.
-
Choose powder coating when you need a durable, thick finish on railings, fixtures, fabricated parts, patio furniture frames, or most commercial metal components.
-
Choose Cerakote when thin-film application, detail retention, or ceramic chemistry is the specific requirement for the part.
-
Choose Wheel Coating when the job involves automotive wheels and you need a shop set up for wheel drop-off, whole-car drop-off, and indoor storage.
Can One Concord Shop Handle Both One-Off Jobs and Recurring Batch Orders?
Yes. Finish Logic’s service structure is built around distinct named service lines rather than a single generalist queue. That matters for buyers who want fewer handoffs and a shop that can handle different job types without re-explaining the project each time.
-
One-off restoration work: A homeowner’s gate, a single set of wheels, or a patio set from a Brown Jordan or Tropitone collection are all handled through the appropriate service line without requiring a minimum order.
-
Recurring commercial batch work: Fabricators and manufacturers with repeat finishing needs can route parts through Commercial Powder Coating. We are based in Concord’s industrial corridor, which puts us within practical reach of commercial customers in Martinez, Pacheco, and Pleasant Hill.
-
Mixed requirements: A fabricator who also needs wheels done for a company vehicle does not need a second vendor. Both jobs go to the same shop.
The practical value: Running multiple service lines under one roof means we can route your job to the right process rather than fitting every part into whatever coating line runs most often. For commercial buyers, that also means one point of contact for quoting, scheduling, and pickup.
Surface preparation is part of every job. The Powder Coating Institute’s FAQ notes that adhesion is highly dependent on substrate cleanliness and proper pretreatment selection. We treat prep as part of the service, not an add-on to negotiate separately.
What Should Bay Area Manufacturers and Fabricators Expect Before Requesting a Quote?
The most useful thing you can do before calling is describe the job clearly: the part, the metal type, the approximate dimensions, and what finish outcome you need. Process suitability and cost are confirmed after inspection, not estimated from a photo.
A few confirmed operational facts to set expectations:
-
Wheel Coating pricing starts at $175 per wheel for bare wheels, $200 per wheel with tires still on, and $225 per wheel for whole-car drop-off. Custom colors, oversized wheels, multi-piece wheels, and chrome wheels are quoted individually before any work begins.
-
Standard turnaround is approximately two weeks for most jobs, including wheels. Expedited options are available; we’ll confirm timing when you book.
-
Outdoor Furniture Restoration includes pickup and delivery up to 150 miles from Concord. Other service lines require customers to bring parts to the shop.
-
Service area by line: Furniture restoration reaches up to 150 miles. Wheel Coating, Cerakote, and Residential Powder Coating serve customers who drive to the Concord shop. Most are within about 60 miles. Commercial Powder Coating is most practical for businesses in the Concord industrial corridor and nearby cities including Martinez, Pacheco, and Pleasant Hill.
-
Part suitability for size, metal type, and condition is assessed at the shop. Call and describe the part if you are unsure whether it qualifies. We’ll confirm fit before you make the trip.
Frequently Asked Questions
Do you take on recurring batch orders for manufacturers, or only one-off jobs?
Finish Logic handles both. The Commercial Powder Coating service line is set up for manufacturers and fabricators with repeat finishing needs. One-off jobs are also accepted across all service lines. There is no minimum order requirement to request a quote.
How do I know whether my project needs powder coating, Cerakote, or a wheel-specific coating?
Powder coating is the right fit for most larger parts, railings, fixtures, and commercial components where a thick, durable finish is the goal. Cerakote is a thin-film ceramic coating suited to precision parts where a thicker film would affect tolerances or obscure fine detail. Wheel Coating is a separate service line for automotive wheels, with its own drop-off and storage workflow. If you are unsure, call and describe the part; we’ll route you to the right service.
Can the same shop handle both residential railings and commercial or industrial parts?
Yes. Finish Logic runs Residential Powder Coating and Commercial Powder Coating as distinct service lines from the same Concord shop. A contractor finishing a residential railing project and a fabricator with a batch of commercial brackets are both served from the same location.
What metals and part sizes can Finish Logic actually finish?
Part suitability depends on the metal type, condition, and dimensions of the specific piece. Finish Logic coats steel, aluminum, and other common metals used in fabrication and manufacturing. Size capacity and process fit are confirmed at the shop after inspection. Call and describe the job to find out whether your part qualifies before dropping it off.
Ready to Request a Quote?
Call 925-788-2911, describe the job, and we’ll route you to the right service line. Every job is backed by a 2-year warranty that mostly meets or exceeds factory warranties. 132 Yelp reviews back the work, from Bay Area customers who chose to restore rather than replace. Don’t Replace it. Restore it!